The TeFIX® technology is also in our lightest ropes for climbing in the mountains. Where else is there a need for good resistance and lifespan of the ropes than in the mountains? Master 7.8 TeFIX®, besides low weight, profits also from better resistances.
- Home
- Products
- Dynamic ropes
- Mountaineering
- TENDON Master 7.8 TeFIX - Green
TENDON Master 7.8 TeFIX - Green
Code: D078MF41S000C
TeNOTE
online tool designed for revising and tracking the condition of ropes. The application is available in Google Play or available on the Web interface. To register use TeNOTE code on the product packaging.
online tool designed for revising and tracking the condition of ropes. The application is available in Google Play or available on the Web interface. To register use TeNOTE code on the product packaging.
Half ropes
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
Twin ropes
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
Standard
Improved basic finishing of dynamic ropes. The new technological process enables the application of impregnation agents early in the standard finishing of the ropes.
Improved basic finishing of dynamic ropes. The new technological process enables the application of impregnation agents early in the standard finishing of the ropes.
Complete Shield
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
Compact
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
Tefix
The TeFIX® patented technology permanently bonds the sheath to the core. It prevents from any slippage between these two basic rope parts. This particular feature was reached by adding a special material between core and sheath. This extra material is later also processed so that the bond is flexible and strong. The rope has a 0% sheath slippage, much longer lifespan, and better handling.
The TeFIX® patented technology permanently bonds the sheath to the core. It prevents from any slippage between these two basic rope parts. This particular feature was reached by adding a special material between core and sheath. This extra material is later also processed so that the bond is flexible and strong. The rope has a 0% sheath slippage, much longer lifespan, and better handling.
CE - symbol of compliance
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
UIAA
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.